Planting, Planting setup tabs, Configuration – Ag Leader InSight Ver.8.0 Users Manual User Manual
Page 103: Configuration tab buttons, Configuration configuration tab buttons, Lanting, Etup
89
P
LANTING
P
LANTING
P
LANTING
S
ETUP
T
ABS
C
ONFIGURATION
The Planting setup pages contain all the necessary settings to
configure the display for logging, mapping, and rate control for
planting operations. The combination of Vehicle, Implement,
and Controller are referred to as a Configuration within the
display.
• The Configuration tab is where you can add and edit operating
configurations. For more information, see
.
• The Vehicle tab is where you can add and edit vehicle
configurations. For more information, see
• The Implement tab is where you can add and edit implement
configurations. For more information, see
• The Controller tab is where you can add and edit controllers for use during planting. For more information,
see
• The Product tab is where you can add and edit new products or edit existing products for planting and
seeding. For more information, see
.
C
ONFIGURATION
T
AB
B
UTTONS
The Configuration Tab is where planting and seeding
configurations are made and displayed. The configuration
settings are also edited on this tab. To go to this window,
press the Setup button and then the Planting/Seeding
button.
• To see a Planting Configuration Menu, see
“Planting/Seeding
Menu Tree” on page
165
.
• Add button
Press to add a new planting or seeding configuration. An on-screen wizard will walk you through the setup
process in a step-by-step manner. New Vehicles, Implements, and Controllers can be created during the
setup process. For site verification wizard guidance, see
“Adding A New Area Logging (Site Verification)
. For rate control/ logging wizard guidance, see
Logging Configuration” on page
.
• Edit Name button
Press to edit the name of a selected configuration. The on-screen keyboard will be displayed to complete
the desired text edits.
• Remove button