Ag Leader InSight Ver.8.0 Users Manual User Manual
Page 225
211
A
PPLICATION
5. Enter Vehicle Name
The display combines the Vehicle Make and Model for use as a Vehicle Name.
Use the on-screen keyboard to edit the vehicle name, if desired.
Press Finish to complete Vehicle setup and continue with the configuration process.
• If you selected Self-Propelled Spreader in
, then skip ahead to
.
• If you selected another type of vehicle, then continue below.
6. Select New Implement
Select an Implement from the drop-down list menu, or press the New button to create a new implement.
7. Select Implement Attachment Method
Use the drop-down list to select an implement attachment method. Check the Spinner Spreader
Implement Type check box.
Press NEXT to continue.
8. Enter Distance from Hitch to Application Point
Enter the distance from the hitch to the application point using the number pad button.
Press NEXT to continue.
9. Enter Implement Name
Use the keyboard button to enter a name for the Implement. Press Finish to complete the Implement
setup process and return to the Operating Setup Wizard.
10. Select Rate Logging/Control
Select Rate Logging / Control from the drop-down list box as the operating mode.
Press NEXT to continue.
11. Select Controller
Use the drop-down menu to select a controller, or press the New button to add a controller.
Press NEXT to continue.
Note: If you do not need to create a new controller, skip ahead to
“Select a Controller Channel” on page
.
12. Select Controller (for Spinner Spreaders or Stepper Spreader Control)
-OR-
If you chose to enter a new controller, the Controller Setup Wizard appears. Select DirectCommand from
the Device drop-down list box.
Choose the appropriate Direct Type according to the module’s part number:
• 4000395 - Spinner Spreader Control 1 CH
• 4000396 - Spinner Spreader Control 3 CH
• 4001611 - Spinner Spreader Control 5 CH
• 4000397 - Spreader Stepper Control
Press NEXT to continue.
13. Enter Suggested Controller Name
The display assigns a default name of DirectSpreader to the controller. Use the on-screen keyboard to
edit the name, if desired.