Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 61)

47
G
UIDANCE
LED Spacing
This setting establishes LED spacing distance. If the setting is 3 feet, the LED slides one unit to the left
or right for every 3 feet off line.
Note: The smaller the LED spacing the more precise guidance the lightbar will provide.
End Distance
This setting is used when in Scaled for LED Spacing Mode. You cannot set an end value smaller than
the LED spacing multiplied by 17 (there are 17 LEDs on each side of the lightbar.)
LED Sensitivity
This setting sets the sensitivity for the PAUSE function. It only affects the large center LED of the Light
Bar. The large LED changes color as you approach headlands, or the Pause/Resume point.
Note: LED sensitivity should be set larger as ground speed increases.
TSIP G
UIDANCE
S
ETTINGS
The Guidance Settings frame includes settings that are used for setting up the guidance pattern.
Pattern
Determines which guidance pattern is driven.
• None
Configures straight line guidance parallel to the beginning and end of the first swath driven.
• Curve Spiral
Use this curve setting to drive spirals or closed rings.
• Curve
Activates last curve following. Positions are logged during current swath. The next swath is parallel to the
previous swath driven.
• Skip Pass
Provides parallel guidance in a racetrack pattern with a user specified swath skip. This setting is for
equipment with a large turn radius.
• A+ Heading
Allows establishing a reference line from True North.
Headlands
Determines the type of headland used.
• None
In this mode, swath lengths are infinite. The center LED remains one color, never changing to indicate end
of swath.
• C-Clamp
Field ends are sprayed as headlands so parallel passes may be used with minimal overlap.
• Curved
Logs irregular boundary shapes for guidance.