Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 318)

304
• DRY BUSHELS button
Displays the number of bushels at the specified dry moisture percentage.
• If the actual moisture is below the set dry moisture percentage and "Expand Bushels for All Grains Below Dry
%" is not checked, it will show actual bushels.
• If "Expand Bushels for All Grains Below Dry %" is checked, it will add water weight back in until it is at the
specified dry percentage.
Note: The Dry Bushels and Wet Bushels buttons do not appear if you are using metric system measurements.
• WET BUSHEL button
Shows the actual bushels that have been harvested for the current region.
• AVERAGE YIELD button
Shows the average yield for the region.
• WET WEIGHT button
Shows the actual weight that has been harvested in the region.
• GRAIN FLOW button
Shows the instantaneous grain flow in the combine.
• MOISTURE button
Displays the instantaneous moisture while there is grain flow and the average when there is no grain flow.
• DISTANCE button
Shows the total distance driven in the current region.
• ELEVATOR SPEED button
Shows the instantaneous speed of the clean grain elevator.
• AREA button
Shows the area harvested for the current region.
• AREA PER HOUR button
Shows the instantaneous productivity.
• GROUND SPEED button
Shows the instantaneous ground speed.
A
UTOMATIC
S
WATH
C
ONTROL
, R
UN
S
CREEN
O
PERATION
AutoSwath automatically increases or decreases
the active (logged) swath width of the combine
head, according to field boundaries and already
harvested areas. By doing so, the display
records a change in logging data, even though
no mechanical change has actually taken place.
By automatically adjusting the active swath width
of the combine head, AutoSwath ensures the
display's correct area calculation, which also
improves the accuracy of your field summaries
and reports.
AutoSwath explained