Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 88)

74
Remove Patterns
You can remove one or all pattern files from the display's internal memory by following the procedure
below.
1. Press the Load Pattern button
The Load Pattern button can be accessed on the Autopilot tab,
(as long as a pattern is not currently active).
2. Highlight the pattern
Select and highlight the pattern that you wish to remove from the
display. When this pattern is highlighted, the Remove and
Remove All buttons become active.
3. Remove the Pattern
On the Load Pattern window, press either the Remove or Remove
All buttons to delete pattern.
• If you select the Remove button, your selected pattern will be
removed from the display's internal memory.
• If you select the Remove All button, then all guidance patterns for
the current field will be removed from the display's internal
memory.
4. Accept the Remove or Remove All message
The Remove Pattern window appears. The content of this window varies depending upon whether you chose
the Remove or Remove All options.
• If you selected the Remove button, the window states: "This pattern will be permanently removed from
memory."
• If you selected the Remove All button, the window states: "All guidance patterns in this field will be
permanently erased from memory."
5. The pattern is removed
Press the Accept button on the Remove Pattern window. After pressing this button, the pattern file disappears
from the Load Pattern window. Press Accept again.