Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 248)

234
Growth Stage — The Growth Stage of the corn plant. Choices are:
• V6-V7
• V8-V10
• Rate Offset
If desired, use the numeric keypad to modify the applied rate in the event of significant field stresses during
a season, such as drought conditions; or to make adjustments because of soil type.
Sensor Setup
You can review the status of individual OptRx sensors at the
Sensor Setup window. To view this window, go to the Implement
Tab, press the Crop Sensor Setup button and the Crop Sensor
Setup window appears. Press the Sensor Configuration button,
and the Sensor Setup window appears, as shown. Each sensor is
shown, with the status of “ON” or “OFF”.
• Enable button
Turns on the individual OptRx sensor.
• Disable button
Turns off the individual OptRx sensor.
G
RANULAR
A
PPLICATION
C
ONTROLS
S
PINNER
S
PREADER
Spinner Spreader Application Rate Control Tab
The Application tab for spinner spreader control has several
buttons and status display areas that are specific to granular
product control. The following table and pages outline the
details of these controls.
Press the Spreader Control button to display the Spreader Control window and settings. For further
information, see
“Spinner Spreader Control Settings” on page 235 .
The setting at left appears on the Application Tab for operators using Fan Frame & Feed Gate
Actuators. The Actuator portion displays both the Fan Frame distance setting and the Feed
Gate opening.
• These settings cannot be adjusted on the Application Tab. Instead, you may change them by
pressing the Spreader Control button and making any changes at the Spreader Control
window.
• In order to view these settings, you must have purchased a New Leader Linear Actuator
unlock code.