Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 240)

226
Shows the instantaneous ground speed.
• AREA PER HOUR button
Shows the instantaneous productivity.
• DISTANCE button
Shows the total distance driven in the region.
• FLOW button
Shows the instantaneous units per minute being applied.
• CONTAINER LEVEL button
Used for basic tank level information.
V
IEWABLE
M
APS
There are three different types of viewable maps in Application, depending on the type of configuration
being used. A site verification configuration will only have coverage available, whereas a rate control/
logging configuration will have all three. The maps are accessed by pressing the button in the legend
that is either labeled COVERAGE, RATE, or Rx (Prescription).
Coverage
The coverage map shows the area of the field where an application has taken place.
Overlaps are also indicated here. This legend is not editable.
Rate
The rate map displays the actual rate being applied if a rate control/ logging configuration
is being used. This legend is editable.
Rx (Prescription)
The Rx (prescription) map displays the prescription rate from the target file. This legend is
not editable.
M
AP
L
EGEND
The rate legend is the only Application legend that can be edited. To edit this legend, press on the range
portion of the Run screen legend. (the boxes underneath the Rate button).
The average, spacing, colors, and ranges can be edited for this map. Use the drop-down boxes and
arrows to adjust these values.
If the automatic legend option is selected the average will automatically set itself to the field average and
update as the field average changes.