Ag Leader InSight Ver.8.0 Users Manual - Manual (Page 158)

144
F
IELD
B
UTTON
(W
HILE
N
OT
L
OGGING
)
The start of planting or seeding in a field is accomplished by setting up a Field Operation at the Run
Screen. This process is similar regardless of the type of field operation currently taking place. To begin,
press the Field button on the Run screen, and the Field Operation Wizard appears, as shown.
1. Select Grower, Farm, Field
a. Choose the field for planting or seeding by making the proper selections from the Grower, Farm, and Field
list boxes.
• If the Filter Fields by Farm check is cleared, the display will show all fields in the Field list box
regardless of what farm the fields are associated with.
b. Press Next to continue.
Note: You may view Field Totals by pressing the Field Totals button on the Field Operation Wizard. For more
information on field totals, see
“Field Button While Logging” on page 145 .
2. Choose Configuration
a. Select the Operating Configuration that relates to the equipment in use.
b. Press Next to continue.
3. Select Product
a. Select the correct product from the list box. In cases of multiple product application, make the appropriate
selection for each channel of product control.
b. Press Finish to complete the Field Operation portion of the setup wizard.
The Region Selection window should appear next. To learn more about the Region Selection window,
see
“Region Button” on page 144 .
R
EGION
B
UTTON
To access the Region Selection window, either complete the
wizard under the Field button or press the Region button.
Region Button
A region is an area within a field. A field is a collection of one
or more regions.
Use the on-screen keyboard to change the region name from
the display default if desired.
The display will control application based upon the product
and units as defined in product setup.