Yaskawa MP940 - Manual (Page 520)

D-5
D
D.3 Scan Execution Status and Calendar
D.4 System Program Software Number and Available Program Memory
Relay 1.0 s after Scan Processing
Starts SB000038
Relay 2.0 s after Scan Processing
Starts SB000039
Relay 5.0 s after Scan Processing
Starts SB00003A
Name Register No. Remarks
High-speed Scan Set
Value SW00004 High-speed scan set value (0.01 ms)
High-speed Scan Current
Value SW00005 High-speed scan current value (0.01 ms)
H-speed Scan Maximum
Value SW00006 High-speed scan maximum value (0.01 ms)
System Scan Set Value SW00007 System scan set value (0.01 ms)
System Scan Current
Value SW00008 System scan current value (0.01 ms)
System Scan Maximum
Value SW00009 System scan maximum value (0.01 ms)
Low-speed Scan Set
Value SW00010 Low-speed scan set value (0.01 ms)
Low-speed Scan Current
Value SW00011 Low-speed scan current value (0.01 ms)
Low-speed Scan
Maximum Value SW00012 Low-speed scan maximum value (0.01 ms)
Reserved by System SW00013 Not used
Executing Scan Current
Value SW00014 Current value of scan being executed (0.01 ms)
Reserved by System SW00015
to
SW00019 Not used
Name Register No. Remarks
System Program Software Number SW00020 Sxxxx (xxxx is stored as a BCD
value)
System Number SW00021
to
SW00025 (Not used)
Remaining Program Memory Capacity SW00026 Unit: Bytes
Total Module Memory Capacity SW00028 Unit: Bytes
Name Register No. Remarks
1.0 s
2.0 s
5.0 s