Yaskawa MP940 - Manual (Page 314)

Parameters
6.4.8 Other Parameters
6-74
6.4.8 Other Parameters
Parameter No.
Name
(Setting
Range)
Contents Default
Control
Modes
Pn600
Regenerative
Resistance
Capacity 10W
0 to 65535 If using an external regenerative resistor, change
the setting of the parameter.
If using a SERVOPACK with or without a built-in
regenerative resistor, set this parameter to its
default setting (0). If an external regenerative resis-
tor is used, set this parameter to the capacity of the
regenerative resistor (W).
Example: If the capacity of the external regenera-
tive resistor is 100 W, set this parameter to 10. 0 Speed
Torque
Position