Yaskawa MP940 - Manual (Page 14)

Safety Precautions
xv
Safety Precautions
This section describes precautions that apply to correct use of devices. Before installing,
operating, maintaining or inspecting devices, always read this manual and all other docu-
ments provided to ensure correct programming. Before using the equipment, familiarize
yourself with equipment details, safety information, and all other precautions.
„ Storage and Transportation
„ Installation
Caution
• If disinfectants or insecticides must be used to treat packing materials such as wooden frames, pal-
lets, or plywood, the packing materials must be treated before the product is packaged, and meth-
ods other than fumigation must be used.
Example: Heat treatment, where materials are kiln-dried to a core temperature of 56
°C for
30 minutes or more.
If the electronic products, which include stand-alone products and products installed in machines, are packed
with fumigated wooden materials, the electrical components may be greatly damaged by the gases or fumes
resulting from the fumigation process. In particular, disinfectants containing halogen, which includes chlo-
rine, fluorine, bromine, or iodine can contribute to the erosion of the capacitors.
Caution
• Always mount the Module securely using the Module mounting spring.
A loose spring may result in a malfunction of the MP940.
• Always turn OFF the MP940 Module before installing or removing it.
• Insert the connectors of the cables to be connected to the Module and secure them well.
Incorrect insertion of the connectors may result in a malfunction of the MP940.
MP940
SERVOPACK
Spring
Spring
mounting hook
Mounting holes