Yaskawa MP940 - Manual (Page 235)

5.8 System Startup
5-63
5
3. Using the Local I/O Definition Window, you can change only the SCAN settings. You
cannot set REG-No. Make these settings using the I/O leading register number/I/O end
register number in the Module Configuration Window.
4. Save the LIO definitions.
Click Save on the Toolbar. The Save Local I/O Message Box will be displayed. Click
the Yes (Y) Button.
„ SVA Definitions
1. Double-click SVA in slot 04.
If no configurations have been saved, the New File Message Box will be displayed. Click the OK But-
ton, and then perform the following operation. INFO