Grass Valley Kaleido-X v.7.80 - Manual (Page 87)

79
Kaleido-X
User’s Manual
Access control is now enabled for this multiviewer.
Disabling Access Control in XEdit
To disable access control in XEdit
1 Connect to the multiviewer you wish to unprotect (see Connecting to a Multiviewer on
page 76).
XEdit prompts you for a password.
2 Type the password associated with the RCP user Admin, and then click Log on.
3 On the Configure menu, click Access control.
Access control is now disabled for this multiviewer.
Importing a Database
To import a database
1 On the Configure menu, point to Database, and then click Import.
A window appears, prompting you for the IP address of the multiviewer whose
database you wish to import.
IP addresses for all the multiviewers that are on the same subnet as your PC are
included in the list.
• If your PC and the multiviewer are on the same subnet, then you can select the IP
address of the multiviewer from the list.
• Otherwise type the appropriate IP address in the box.
2 Click OK.