Grass Valley Kaleido-X v.7.80 User Manual
Page 477
469
Kaleido-X
User’s Manual
Fan 3 (replace whole
module if in error)
Fan 3 is running too low or is broken.
x
Fan 4 (replace whole
module if in error)
Fan 4 is running too low or is broken.
x
Fan 5 (replace whole
module if in error)
Fan 5 is running too low or is broken.
x
Fan 6 (replace whole
module if in error)
Fan 6 is running too low or is broken.
x
Fan 7 (replace whole
module if in error)
Fan 7 is running too low or is broken.
x
Fan 8 (replace whole
module if in error)
Fan 8 is running too low or is broken.
x
Fan 9 (replace whole
module if in error)
Fan 9 is running too low or is broken.
x
Rear Fan 1 (replace whole
module if in error)
Fan 1 is running too low or is broken.
x
Rear Fan 2 (replace whole
module if in error)
Fan 2 is running too low or is broken.
x
Rear Fan 3 (replace whole
module if in error)
Fan 3 is running too low or is broken.
x
Rear Fan 4 (replace whole
module if in error)
Fan 4 is running too low or is broken.
x
Rear Fan 5 (replace whole
module if in error)
Fan 5 is running too low or is broken.
x
Rear Fan 6 (replace whole
module if in error)
Fan 6 is running too low or is broken.
x
Board temperature high
This warning means that a card is warmer
than normal and that you should verify
cooling and ventilation (e.g., check for
anything obstructing the ventilation
openings).
x
x
Board temperature critical
This alarm means that a card is
overheating, which might result in
decreased system performance (e.g.,
green dots, flickering, card not starting).
You should halt operations until the
overheating problem is resolved.
x
x
Blower 1 (replace whole
module if in error)
Blower 1 is running too low or is broken.
x
Blower 2 (replace whole
module if in error)
Blower 2 is running too low or is broken.
x
Blower 3 (replace whole
module if in error)
Blower 3 is running too low or is broken.
x
Message
Description
7RU 4RU X16
KMV KMX