Grass Valley Kaleido-X v.7.80 - Manual (Page 196)

188
Configuring Alarms
Publishing Alarms to SNMP Managers
3 In the Properties pane, select the Trap enabled check box to have the multiviewer
issue an SNMP trap each time this alarm is triggered.
4 Click Apply to all to apply this setting to all other alarms with the same name,
throughout the system.
In the example, clicking Apply to all will enable Video Loss SNMP traps for every input
in your system. This is particularly useful for audio input errors, because of the large
number of channels arriving at the multiviewer.
5 Repeat the procedure until all desired SNMP traps have been enabled.
6 On the File menu, click Save.