Grass Valley Kaleido-X v.7.80 - Manual (Page 499)

491
Kaleido-X
User’s Manual
5 Using a Web browser on the PC, connect to the ABT using the following address:
10.0.3.190.
The home page of the ABT’s built in Web server is displayed.
6 Click Network Configuration (in the navigation pane).
The Network Configuration page is displayed.
7 Change the ABT’s network settings, as necessary, and then click Apply & Reboot.
For more information, please refer to the Audio Bridge Terminal Guide to Installation and
Operation, available on the DVD that shipped with your system, and from
the
Documentation Library section of Grass Valley’s website .
Enabling Options
To enable options on a multiviewer
1 Open XAdmin. See Opening XAdmin on page 507.
The XAdmin Status and Options page appears.
2 Click the arrow button at the end of the heading row that corresponds to the module
for which you wish to enable an option.
Note: If you purchased more than one Audio Bridge Terminal unit, keep in
mind that they all ship with the same default static IP address. Make sure to
assign each of them a different static IP address before connecting them to
the network, if DHCP is not used.