Acknowledging alarms by using an action, Triggering audio monitoring, Sound. see – Grass Valley Kaleido-X v.7.80 User Manual
Page 70: Triggering audio, Monitoring
62
Operation of the Monitor Wall
Triggering Audio Monitoring
To acknowledge all current alarms in a room
• Right-click the monitor wall, point to Monitor wall (if you clicked a monitor), and then
click Unlatch/Acknowledge all on the menu.
This will acknowledge every alarm monitored in the current room.
Acknowledging Alarms by Using an Action
To acknowledge alarms, by using an action
• Create a Unlatch/Acknowledge all action. This action can be assigned to a monitor on
the monitor wall, it can be triggered by loading or unloading a layout, or it can be a
background action. See
on page 321 for details.
Triggering Audio Monitoring
Unlatch/Acknowledge
Unlatch/Acknowledge all
Note:
Before connecting a display or AV receiver to a Kaleido-IP
multiviewer, make sure the multiviewer is powered off. In the advent that
you have connected such a device while the multiviewer was running, you
must restart the multiviewer for audio monitoring to be functional.
See