Grass Valley Kaleido-X v.7.80 User Manual
Page 500
492
Administration and Servicing
Enabling Options
3 Locate the entry for the option you wish to enable.
For example, to activate the Extraction of CC, Subtitling and XDS metadata option
(CC/XDS Option) for a Kaleido-X input card, you would need to locate the appropriate
card in XAdmin’s Status and Options page, expand it, and then locate the
KXI-16-CC/XDS option line.
4 Click the Enable button.
A window appears prompting you for the option key.
5 Enter the key for the specific option in the box, and then click OK.
Once the option is enabled, the key is displayed, and a Disable button replaces the
Enable button.
Notes
• The Kaleido-IP currently supports extraction of CC/subtitling and XDS data
(1 license/program), and display rotation. It is not yet possible to enable or
verify these options in XAdmin’s Status and Options page, for this
multiviewer model. Contact Technical Support for activation and
configuration instructions (see
• One CC/XDS Option key is needed per input card, and the extraction of CC
608, CC 708, XDS and Subtitling WST metadata are all activated as a single
option.
• After enabling the 3D Support option in XAdmin, refresh the current layout
or load another one, for the change to be reflected on the monitor wall.
• For a complete list of the options that can be enabled and disabled via the
XAdmin Status and Options page, see
Click to expand
Click to collapse