Grass Valley Kaleido-X v.7.80 - Manual (Page 314)

306
Creating Layouts
Configuring Clocks
4 Modify the clock’s Appearance properties as needed:
• From the Clock type list, select between a digital, an analog or a combo-type clock.
• Resize the clock as needed, set color attributes and select the appropriate date and
time formats.
• In the case of a digital or combo-type clock, select the Display leading zero check
box, if you wish to see the time with a leading zero when it is before 10:00 a.m. or
10:00 p.m.
• In the case of an analog or combo-type clock, you can also add a clock logo
(see Inserting a Clock Logo on page 307).
• In the case of an analog or combo clock, if the clock is to be displayed against a
pink background— RGB (255, 0, 255) or similar—, or if the current layout belongs
to a cascade room (see
page 71 ), then make sure to clear the Border antialiasing
check box.
• Refreshing the current layout (or switching to another layout and then
back) cancels the fallback mechanism. When this happens, the clock that
had lost its time reference halts, showing the time it was at the moment
the layout was refreshed (or loaded again), based on the multiviewer
system clock.
Notes (continued)