Modifying transport streams and hls playlists, Rmation, see – Grass Valley Kaleido-X v.7.80 User Manual
Page 118
110
Managing Kaleido-X Systems
Configuring the System Representation
Modifying transport streams and HLS playlists
To modify the settings for a transport stream or HLS playlist
1 In the main window, click the System tab, and then click Description/Calibrations on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the transport stream or
master playlist you wish to configure.
The settings for the selected stream or master playlist appear in the Properties pane.
Source settings (example showing settings for an any-source multicast stream)
Source settings (example showing settings for an HLS master playlist)
3 Replace the stream name if desired and then, depending on the stream type:
• Select the appropriate protocol (RTP, UDP).
• Enter the multicast group IP address (in the case of a multicast stream) and port
number associated with the actual transport stream you wish to monitor.
Note:
Under the network adapter elements, transport streams and HLS
playlists are listed in alphabetical order.