Grass Valley Kaleido-X v.7.80 - Manual (Page 124)

116
Managing Kaleido-X Systems
Restoring Factory Defaults
A message appears, prompting you to confirm your intention.
2 Click Yes.
XEdit then prompts you to confirm that you want to restore the factory defaults for the
multiviewer model you chose.
Note:
If you are working in online mode, the set of multiviewer models available
from the menu varies according to the current model. If the current model is
a Kaleido-IP, then only the other Kaleido-IP models are available for
selection.
Conversely, if the current model is not a Kaleido-IP, then none of the
Kaleido-IP models are available for selection.
Select... To represent a...
Kaleido-X16-S Kaleido-X16 (single output)
Kaleido-X16-D Kaleido-X16 (dual output)
Kaleido-X (4RU) Kaleido-X (4RU)
Kaleido-X (7RU) Kaleido-X (7RU)
Kaleido-X (14RU) Two Kaleido-X (7RU) frames, with expansion cards
Kaleido-Modular Any KMV-3901/3911, Kaleido-XQUAD, or Kaleido-XQUAD-DUAL
Kaleido-MX Any Kaleido-MX, Kaleido-MX 4K, or Kaleido-Modular-X
Kaleido-IP-2 Kaleido-IP X300, or X100 with two network adapters
Kaleido-IP-4 Kaleido-IP X110, X310, or X300 with four network adapters
Kaleido-IP-6 Kaleido-IP X310, or X300 with six network adapters