Grass Valley Kaleido-X v.7.80 - Manual (Page 435)

427
Kaleido-X
User’s Manual
Depending on the multiviewer model, the available RS-422 ports are designated as
follows:
9 In the Interconnects tab, click the Kayak production switcher icon.
10 In the Properties pane, set the serial
communications properties for the Kayak device as
follows:
Assigning Kayak tallies, input names, and output
names to logical sources
To configure your logical sources
• In the Channels/Sources tab, configure logical sources using text sources and system
tallies from the Kayak’s serial interface.
KMV-3901/3911 RS-422
Kaleido-X16 Port 1, and Port 2
Kaleido-X (14RU) Frame A – Output A, B, and C; Frame B – Output A, B, and C
Kaleido-X (7RU) Output A, B, C, and D
Kaleido-X (4RU) Output A, and B
Kaleido-MX,
Kaleido-MX 4K Output A, and B
Note: The Kaleido-MX (1RU) 16 × 4, and the Kaleido-MX 4K
16 × 1 models have only one RS-422 port, which is physically
connected to output card A.
Kaleido-Modular-X Output A, and B
Note: KMX-3901-OUT output cards with a single rear
connector panel (KMX-3901-OUT-D-3+SRP) do not have RS-
422 ports. To support a serial device, your Kaleido-Modular-X
system must have at least one output card with a double rear
connector panel (KMX-3901-OUT-D-3DRP).
Baud Rate 38400
Data Bits 8
Parity NONE
Stop bits 1