Grass Valley Kaleido-X v.7.80 - Manual (Page 488)

480
Administration and Servicing
Assigning an IP Address to Each Device in your System
Finding a Multiviewer’s System IP Address and Application Version
To find the system IP address, system name and application version
• Right-click anywhere on the monitor wall. On the menu, point to Monitor wall, and
then click Show dashboard to display the dashboard associated with the current
output head.
A small window appears, revealing the system IP address and the system version.
Partial view of a monitor wall display showing dashboard at the bottom right
Enlarged view of dashboard.
Changing the Client PC’s IP Address
Both the client computer you use to communicate with the multiviewer (e.g., via XAdmin,
and XEdit), and the multiviewer itself must have IP addresses within the same subnet.
Kaleido multiviewers are shipped with the default IP settings listed under
Default IP
Settings , on page 461. The following procedure applies to a typical Windows 7 or
Windows 8 system. For Windows XP, see Changing an IP address on Windows XP , on
page 482.
Application version
System IP address
System name Room name