Grass Valley Kaleido-X v.7.80 - Manual (Page 191)

183
Kaleido-X
User’s Manual
4 Modify your virtual alarm, by adding or removing sub-alarms, changing their
contribution, the alarm name or path, etc. Refer to Creating Virtual Alarms , on
page 177, as needed. For example:
• after selecting the sub-alarms you wish to remove from the table in the bottom half
of the window, click the large up arrow button.
• after selecting the appropriate alarm provider from the list in the left-hand part of
the GSM alarm browser pane, select the sub-alarms you wish to add, from the
right-hand part of the alarm browser, and then click the large down arrow button
to transfer them to the table in the bottom half of the window.
5 Once you have completed your changes, click OK to close the Build Virtual Alarm
window.
Deleting Virtual Alarms
To delete a virtual alarm
1 In the sources table, select a text or alarm level.
Alternatively, click the Actions tab.
2 Expand the filtered System list, and navigate to the virtual alarm you wish to delete.
3 Right-click the alarm, point to Virtual alarm, and then click Delete.