Grass Valley Kaleido-X v.7.80 User Manual
Page 157
149
Kaleido-X
User’s Manual
3 In the Properties pane, type the page number you wish to be the default selection for
Page A, in the Teletext page A selection box. Alternatively, use the slider to set the
page number.
4 If you wish to enable or disable teletext decoding for this page, then select or clear the
Enabled check box accordingly.
Only decoding of Page A is enabled by default.
5 Repeat the procedure for the Page B, to Page H elements.
Configuring Teletext/Subtitling Page Selection for a Kaleido-X, Kaleido-X16,
Kaleido-MX, Kaleido-MX 4K, or Kaleido-Modular-X
To configure Teletext/Subtitling page selection for a Kaleido-X, Kaleido-X16,
Kaleido-MX, Kaleido-MX 4K, or Kaleido-Modular-X
1 In the main window, click the System tab, and then click Description/Calibrations on
the second-level tab bar.
A hierarchical list representing the current system appears.
2 In the list, expand the multiviewer whose inputs you wish to calibrate.
3 Expand the appropriate input, then one of its Video elements.
4 Under Teletext & subtitling alarms, expand the Page A element, and then click Page
selection.
Note:
Alarms can be configured for all eight preset pages (see
on page 175 for instructions on how to configure the
alarms).