Grass Valley Kaleido-X v.7.80 User Manual
Page 109
101
Kaleido-X
User’s Manual
• alternatively, NETWORK ADAPTER 3, 4, 5, or 6, for a high-bitrate stream, in the case
of a four-port or six-port Kaleido-IP model;
• optionally, NETWORK ADAPTER 1 for a low-bitrate stream.
The supported stream types (Multicast, Unicast, HTTP, RTSP) are listed in the Tools
pane.
3 Drag Multicast from the Tools pane onto the network adapter.
The Multicast Stream Configuration window appears.
4 In Multicast Stream Configuration, replace the default stream name if desired, select
the appropriate protocol (RTP, UDP), and type the multicast group address and port
number associated with the transport stream you wish to add.
5 If the stream you wish to add is constrained to a virtual LAN, select Virtual LAN
tagging, and then type the appropriate VLAN identifier.
Notes
• The Kaleido-X software supports UTF-8 encoded stream names. The only
characters, which cannot be used in a stream name are:
@ / \ '
and
"
.
• Verify the protocol you selected. Registering an RTP stream as UDP instead
of RTP may result in the decoded video appearing jerky or accelerated on
the monitor wall.