MTS Multipurpose Elite - Manual (Page 96)

Import Test Resources
The procedure applies only to the Import Resources button on the Resources tab in the Explorer panel.
You can only import test resources from the connected test station or another test in the same project.
When you import an entire project, the test resources can be included for each test in the project. Depending
on the origin of the information, the imported resources may not map to the station resources of the control
system networked with your session or workstation.
1. Open the required test.
2. If you want to import resources from the test station, click Controller > Connect.
3. Click Resources on the test hierarchy and the click the Resources tab on the work area.
4. Click the Import Resources button on the work area to show the Options menu.
5. To import resources from a connected station, select one of the following options: Click Import all
unused station resources to import all the station resources that are not currently in use by the test.
Click Import selected station resources to select which unused resources you want to add to the
test.
6. If you clicked Import selected station resources:
a) Expand the unused resources hierarchy and select the check boxes for the resources to import, or
click Select All to select all unused resources.
b) Select the Display internal names check box to show the internal names for the resources in the
work area instead of their display names.
c) Click OK.
d) The table of test resources updates and a message window indicates that the import was successful.
Click OK.
e) If all the station resources are already in use by the test, a corresponding message is shown. Click
OK.
7. To import resources from another test in the current project:
a) Click Import resources from another test to overwrite the test resources with the imported
resources.
b) In the Import resources from another test window, select or browse to the source test, and then click
OK.
c) The table of test resources in the work area is updated and a message indicates that the import
was successful. Click OK.
For More Information
Concept
Resources Overview (p. 88)
Reference
Add Test Resources (p. 93)
Resources Tab Buttons (p. 92)
Resources Tab (p. 89)
96 | MTS TestSuite
Working with Resources