MTS Grip-Manual Bollard-500 N User Manual
Grip-manual bollard, 500 n, Mts fundamental
Specifications
Model
FCB502B
Height
152
mm
(5.984 in)
Width
114.4
mm
(2.295 in)
Depth
58.3
mm
(4.504 in)
Weight Per Grip 910
g
(2.006 lb)
Maximum Load
0.5
kN
(110 lbf)
Jaw Size (w×h)
8 x 35 mm (0.315 x 1.378 in)
Jaw Face
Flat
Specimen
Linear densities
Jaw Opening Maximum
5 mm (0.197 in)
Interface
D
Temperature Range
0 ℃ to +50 ℃ (+32 ℉ to +122 ℉)
Saline Tolerant
No
Immersion Proof
No
Copyright information
© 2010 MTS Systems Corporation. All rights reserved.
Trademark information
MTS is a registered trademark and MTS Fundamental
is a trademark of MTS Systems Corporation within the
United States. These trademarks may be protected in
other countries.
Contact information MTS Systems Corporation
http://www.mts.com/en/Global/index.asp
ISO 9001 Certified QMS
Grip-Manual Bollard, 500 N
http://support.mts.com
MTS Fundamental
™
Accessories
100-231-451
- Series 111 Accumulator (40 pages)
- Series 249G2 Swivels (34 pages)
- Series 201 Actuators (40 pages)
- Series 215 Rotary Actuator (68 pages)
- Series 242 Actuators (40 pages)
- Series 244 Actuators (68 pages)
- Series 247 Actuators (40 pages)
- Series 248 Actuators (46 pages)
- 709 Alignment System (158 pages)
- Series 609 Alignment Fixture (70 pages)
- 494 Controller Hardware FT 40 (344 pages)
- ReNew Technical Reference (50 pages)
- DCPD Measurement System (46 pages)
- Bionix EnviroBath (40 pages)
- FGW900 High-temperature Furnace (38 pages)
- Model 409.83 Temperature Controller (40 pages)
- Series 651 Environmental Chambers (30 pages)
- Series 653 High-Temperature Furnaces (38 pages)
- Series 658 Environmental Chamber (24 pages)
- Series FEC Environmental Chamber (48 pages)
- Model 685.53 Grip Control Module (24 pages)
- Series 685 Hydraulic Grip Supply (48 pages)
- Bend Fixture-10 kN (2 pages)
- Grip-Manual Bend Fixture-100 kN (2 pages)
- Grip-Manual Bollard-2 kN (2 pages)
- Compression Platen-100 kN-100mm (2 pages)
- Compression Platen-100 kN-150mm (2 pages)
- Compression Platen-100 kN-200mm (2 pages)
- Compression Platen-20 kN (2 pages)
- Compression Platen-20 kN-100mm (2 pages)
- Compression Platen-20 kN-200mm (2 pages)
- Compression Platen-20 kN-SST (2 pages)
- Compression Platen-500 N FYC502A (2 pages)
- Compression Platen-500 N FYB502A (2 pages)
- Compression Platen-500 N-50mm (2 pages)
- Grip-Pneumatic Vise-Style-1 kN (2 pages)
- Pneumatic Bollard-500 N (2 pages)
- Scissor-Style-2 kN (2 pages)
- Scissor-Style-5 kN (2 pages)
- Screw-Style-5 kN (2 pages)
- Screw-Style-5 kN-SST (2 pages)
- Bend Fixture-1000 kN (2 pages)
- Bend Fixture-300 kN (2 pages)
- Bolt Grips (32 pages)