MTS Multipurpose Elite - Manual (Page 104)

Multiple instances of test runs
To avoid possible resource conflicts, do not open multiple instances of the same test run.
For More Information
Task
Create a New Test Run (p. 104)
Reference
Colors Indicating Test Run State (p. 104)
Colors Indicating Test Run State
The color of a test run entry indicates its run state.
Colors of Test Run State
Description Color
The test run completed successfully.
Black
The test run initialized successfully but has not run.
Dark Blue
The test run stopped.
Red
An error or interruption occurred.
Orange
If a test run name is orange, data may not be available. If an error occurs while the test runs, no data is
viewable. If an interruption occurs, some data may be available.
For More Information
Concept
Test Runs Overview (p. 102)
Task
Create a New Test Run (p. 104)
Create a New Test Run
To create a new test run:
1. Click File > New > Test Run.
2. Select a specimen from the Select a Specimen window and then click OK.
To create a new specimen:
a) Click Add New.
b) Optionally specify a Specimen Name.
c) Select a Geometry.
d) Specify the required specimen parameters, and then click OK.
3. Review the variables in the Setup Variables window, and modify values as necessary.
104 | MTS TestSuite
Working with Multipurpose Elite