MTS Multipurpose Elite - Manual (Page 602)

Test Summary Table
You select the variables from the types that are currently defined for the test under Variables. Although
you can list any of the available variables, the Test Summary display is typically used to show general
test data rather than collected data.
Static and dynamic values
Most of the Specimen and System variable values shown on the Test Summary Table are static and
reflect fixed values you have entered (for example, Name of the Project).
Other variable values are dynamic and change during the test run. They are typically calculated variables
that include dynamic signals in their expressions (for example, command or feedback). In general, dynamic
values in the Test Summary Table are updated at the same rate as information in chart, scope, and meter
displays.
Test Summary Table Properties
Display Name
This is the name that is shown for the object in the application. It is a required property so the box cannot
be empty. The default is the type of the chart and the number indicating how many are on the Display tab,
such as Cycle Statistics Table 1. You can also click in the box and type a new name.
Note:
The Display Name is only used in the event of validation errors.
Visibility Panel
Visibility Panel
602 | MTS TestSuite
Test-Run Displays