MTS Multipurpose Elite - Manual (Page 355)

Description Item
is a constant linear rate (as with a ramp shape) or a
varying rate (as with a sine shape). The choices are:
• Square
• Ramp
• Sine
• Square Tapered
• Ramp Tapered
• Sine Tapered
Specifies how the sweep progresses: Sweep Type
• Linear—Steps the sweep linearly by the Sweep
Rate between Frequency 1 and Frequency 2.
• Logarithmic—Steps the sweep logarithmically by
the Sweep Rate between frequency 1 and
Frequency 2.
Specifies the rate at which the sweep progresses. Sweep Rate
Specifies how many times the sweep will repeat. Sweep Count
Note:
If you enter -1 in the sweep count box, the
sweep is continuous.
Defines the starting sweep frequency. Frequency 1
Defines the ending sweep frequency. Frequency 2
Enables command compensation during the
Command activity. Compensator
Defines the segment end level. Relative End
Levels
Relative End Levels is relative to the starting
command value (the value when the activity begins).
Note:
If Relative End Levels is not selected, end
levels are relative to setpoints.
Click the green plus sign to open the Select Channels
window and select one or more channels to use the
activity. Channel List
MTS TestSuite | 355
Test Activities