MTS Multipurpose Elite - Manual (Page 78)

Description Setting
window automatically populates the From address
in the Properties panels of the Send E-Mail and Send
Report to E-Mail of the Run Report activities.
The name of the SMTP server for your organization. Server name
The SMTP (Simple Mail Transfer Protocol) port
number is typically TCP Port 25. If the server is set
up for SMTP, the port number is typically 465. SMTP port
number
If you server does not support SSL (Secure Sockets
Layer), clear the Enable SSL check box. Enable SSL
If your e-mail server supports secure connections,
leave the Enable SSL check box selected.
Default: Enabled
Adjust the default timeout value at the
recommendation of your e-mail system administrator. Timeout
(seconds)
Default: 120 seconds
Select the check box if your server requires
authentication to relay mail to e-mail addresses that My server
requires
authentication
are external to your orgnaization. Enter your Account
Name and Password.
Clear the check box if your server does not require
authentication; that is, you are sending e-mail only
internally.
Default: Enabled
Enter the e-mail address to which you want to send
a test e-mail. This is highly recommended to ensure Send test e-mail
to address
you have correctly configured this option prior to
using the Send E-Mail activity in a test.
The body of the test message contains your SMTP
server settings.
The test e-mail address is cleared when you exit the
Configuration window.
78 | MTS TestSuite
Preferences and Default Settings