MTS Multipurpose Elite - Manual (Page 375)

Description Item
Specify the name of the block that is shown in
variable chart views that shows boundaries of data,
such as the history view or hysteresis view. Display Name
Opens the Block Decimation Filter Selection window
in which you can specify the frequency of
downsampling. Select Blocks
For More Information
Concept
DAQ Activity Overview (p. 371)
Task
Acquiring Data While Holding (p. 375)
Collecting a Last Data Point (p. 375)
Acquiring Data While Holding
Complete the following steps to continue acquiring data while a test has been paused.
1. Click on the DAQ activity to open its Properties panel.
2. Click Advanced. The Advanced Data Acquisition window is displayed.
3. Select the Acquire Data While Holding check box.
4. Click OK.
For More Information
Concept
DAQ Activity Overview (p. 371)
Reference
Basic DAQ Activity Properties (p. 372)
Advanced Data Acquisition Properties (p. 373)
Collecting a Last Data Point
Complete the following steps to ensure a last data point is collected when a test has been interrupted.
1. Click on the DAQ activity to open its Properties panel.
2. Click Advanced. The Advanced Data Acquisition window is displayed.
3. Select the Collect Last Data Point check box.
4. Click OK.
For More Information
Concept
DAQ Activity Overview (p. 371)
Reference
Basic DAQ Activity Properties (p. 372)
Advanced Data Acquisition Properties (p. 373)
MTS TestSuite | 375
Test Activities