Timed daq triggering overview, Timed daq trigger properties – MTS Multipurpose Elite User Manual
Page 144
Task
Reference
(p. 144)
Peak Valley DAQ Trigger Properties
(p. 147)
Timed DAQ Triggering Overview
Timed data acquisition records the values of selected signals at a user-defined frequency (sample rate)
for a specified duration.
Timed DAQ Triggering
For More Information
Task
Reference
(p. 144)
Peak Valley DAQ Trigger Properties
(p. 147)
Timed DAQ Trigger Properties
DAQ Timed Trigger Properties Window
Sample Selection
Select the method used to determine when data is acquired.
•
Time Between Points - Provides a convenient list of time units (ms, sec, minute, hour, day) that allow
you to define when data is acquired.
The time between points setting must be a multiple of the system period:
— If you are connected to a controller, the time that you enter is automatically adjusted to be the closest
multiple of the system period.
— If you are not connected to a controller, you can enter any value; however, when you do connect to
a controller, the application checks the system rate and automatically adjusts the time to the closest
multiple of the system period.
144 | MTS TestSuite
Data Acquisition (DAQ)