Bass & treble effect, Delay effect, Flange & chorus effect – Adobe After Effects CS3 User Manual
Page 377
AFTER EFFECTS CS3
User Guide
372
See also
“Preview video and audio” on page 120
Bass & Treble effect
The Bass & Treble effect boosts (increases) or cuts (decreases) the low frequencies (bass) or the high frequencies
(treble) of the audio. For greater control, use the Parametric EQ effect.
See also
“Preview video and audio” on page 120
Delay effect
The Delay effect repeats audio after a specified amount of time. This effect simulates sound bouncing off a surface,
such as a wall.
To simulate the acoustic ambience of a room, use the Reverb effect.
Delay Time
Time between the original sound and its echo, in milliseconds.
Delay Amount
Volume of the first delayed audio, as a fraction of the original.
Feedback
Amount of the echo that is fed back into the delay line to create subsequent echoes.
Dry Out, Wet Out
The amounts of the original (dry) sound and delayed (wet) sound in the final output. Values of
50% are commonly used.
See also
“Preview video and audio” on page 120
Flange & Chorus effect
Flange is an audio effect caused by mixing the original audio with a copy that is delayed by a varying amount that
cycles over time. The frequency of the copy is also offset by an amount related to the delay. Chorus uses a larger delay,
to make one voice or instrument sound like many.
The default settings for the Flange & Chorus effect are for flange. To create a chorus result, use values something like
the following: 40 for Voice Separation Time (or higher for a greater chorus result), 4 for Voices, 0.1 for Modulation
Rate, 50% for Modulation Depth, and 90 for Voice Phase Change, with Stereo Voices selected.
Voice Separation Time
The time in milliseconds that separates each voice. Each voice is a delayed version of the
original sound. Use values of 6 or lower for flange, and higher values for chorus.
Voices
The number of voices in the processed (wet) audio.
Modulation Rate
The rate in Hz at which the modulation cycles.
Modulation Depth
The amount of modulation.
Voice Phase Change
The modulation phase difference in degrees between each subsequent voice. Divide 360 by the
number of voices to find the optimum value.
Invert Phase
Inverts the phase of the processed (wet) audio, emphasizing more of the high frequencies; not inverting
the phase emphasizes more of the low frequencies.