Clear-Com Eclipse-Omega - Manual (Page 82)

Clear-Com
Eclipse Configuration Software Instruction Manual
3 - 2 8
The template checkbox indicates that this project is to be fixed as
read-only. It can be used as a basis for creating new projects, by
opening the configuration and saving it as a new project.
Click on the ‘Update Details’ button to update the project without
closing the Configuration Manager screen.
Creating a New Configuration
It is possible to create new configuration which may be empty or
containing only the hardware discovered from the matrix.
1. In ‘System’ right-click the display for the target matrix in the main
section of the display. An options menu is displayed.
2. Select ‘Configuration’ and then ‘Create New Configuration’ and then
either ‘Discover Hardware’ or ‘Empty’.
Figure 3-33: Creating a New Configuration
3. If ‘Discover Hardware’ is selected a warning message will be
displayed before the current hardware configuration is replaced.
Figure 3-34: Discover Hardware Confirmation
4. Click on the ‘Yes’ button to confirm the operation. ECS will then
interrogate the matrix to obtain the current hardware configuration.
5. If ‘Empty’ is selected the configuration is created with no hardware
or configured devices. The matrix IP address will default to
169.254.0.100.