Clear-Com Eclipse-Omega - Manual (Page 278)

Clear-Com
Eclipse Configuration Software Instruction Manual
7 - 2 6
Figure 7-32: Reassign Labels Screen
5. Drag the mouse cursor up the screen into the mimic area and
position it over the required key.
6. To place the Label in the required position left click the mouse and
the Label will drop into position.
7. Repeat for all required Label programming.
The label to be assigned will show orange and can be placed on a
panel key.
To program a Combo key (Talk and Listen key) press and hold the
keyboard “Ctrl” key and then select the Talk label and place that onto
the panel.
To program a Talk and Forced Listen key press and hold the keyboard
“Alt” key and then select the Talk label and place the label onto the
panel.