Clear-Com Eclipse-Omega - Manual (Page 436)

Clear-Com
Eclipse Configuration Software Instruction Manual
1 4 - 6
Figure 14-7: Crosspoint Level Slider
Select the ‘Refresh All’ option to update the display with the crosspoint
settings current on the matrix.
CROSSPOINT SETTINGS AND AVERAGING
In some cases the same port may be placed on a panel as different
key more than once, for example on different shift pages (multiple
instances of the port). If these instances of the port or keys have been
set up with different audio levels then the level used on any of keys
connected to the port will be the average of the levels of all the
instances on the panel. This is to prevent a situation where the audio
level from the same port may vary greatly between different keys
assigned to that port depending on how the different keys have been
set up.
To improve the performance of the level averaging on ICS panels and
i-Stations the crosspoint range for these panels is larger than
previously. The preset levels in the matrix for ICS panels and i-stations
are:
• -30.2 dB
• -24.1 dB
• -18.1 dB
• -12.1 dB
• -9.2 dB
• -6.0 dB
• -3.9 dB
• -2.1 dB
• 0 dB