Clear-Com Eclipse-Omega - Manual (Page 198)

Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 8 8
Figure 5-21: Party Line Global Settings
PARTY LINE SOFT MODE OPTIONS
To enable/disable Soft Mode Options
1. Open the Party Line screen by selecting the ‘Party Lines’ link on the
Configuration menu.
2. Create a Party Line or select a Party Line that was been previously
created.
3. Expand the ‘Soft Mode Options’ item in the ‘Properties’ window.
4. Select the required options:
• Default Assign as Talk and Forced Listen. When true the default
for a key assigned to this label is Talk and Forced Listen.
• Enable Assignment as Listen. This must be enabled to allow a
4000E or V-Series panel operator to assign a listen key to this
label. If it is not enabled a 4000E/V-Series panel operator cannot
assign a listen key to the label.
• Enable Assignment as Talk. This must be enabled to allow a
4000E or V-Series panel operator to assign a talk key to this label.
If it is not enabled a 4000E/V-Series panel operator cannot assign
a talk key to the label.
• Protect Port from Assignment. When this option is enabled the
port cannot be locally assigned as a talk/listen key by another
panel.
5. Select the drop down arrow and select the required status.