Clear-Com Eclipse-Omega - Manual (Page 72)

Clear-Com
Eclipse Configuration Software Instruction Manual
3 - 1 8
that the source is connected to is specified in the ‘Redirect Port’ box
and a label associated with it that will be displayed.
Network Comfort Tones are used to indicate the status of the trunk
lines between matrices.
The system states are:
• No Trunk (a requested trunk line is unavailable)
• System Down (requested destination system is unavailable)
• Trunk Clear (requested trunk line is available)
Whenever one of these conditions occurs as a result of a request from
a panel the appropriate tone will be routed from the specified port to
the requesting panel and the label displayed on the reply key or
answer back key.
ISO and IFB Setup
The ISO and IFB settings define how these operations are impleted on
the system.
Figure 3-20: ISO and IFB Tab
In the default operation with the box not checked, when a path
between the source panel and an ISO destination is activated any
other listen paths at the ISO destination will remain active, enabling the
ISO destination to hear both the caller and the other listens during the
ISO conversation. This is shown in Figure 3-21 with the Source panel
calling CAM-3.