Port number, Port function, Talk label – Clear-Com Eclipse-Omega User Manual
Page 175: Listen label, Description, Figure 5-38 ip ports -65
Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 6 5
This action adds an LMC-64 card to be used for communication over
IP. The System Ports display will show a single port entry that can be
configure for 16-64 meters.
Figure 5-38: IP Ports
Port Number
The port number on the LMC-64 card. This does not have a function
as the card does not provide external ports.
Port Function
This is always fixed as ‘Meter’.
Talk Label
This is label does not have a function as the LMC-64 port cannot be
assigned as a label. It can be edited.
Listen Label
This is label does not have a function as the LMC-64 port cannot be
assigned as a label. It can be edited.
Description
An optional description for the port of up to 255 characters long.
The LMC-64 card must be configured before it can be used. To set the
IP parameters click on the ‘Card Properties’ link on the lower right of
the Matrix Hardware display. This will display the settable parameters.