Description, Source, Action – Clear-Com Eclipse-Omega User Manual
Page 202: Description -92, Source -92, Action -92, Figure 5-24 routes configuration screen -92
Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 9 2
Figure 5-24: Routes Configuration Screen
After the route has been set up using this screen, it is possible to
assign it to a label from the Control Manager screen. Within the Panel
Programming screen and the Stacked Keys area, with the Control
Label programmed onto a panel then double clicking this Label, the
attachments to the Label are displayed.
The following is an explanation of each column:
DESCRIPTION
Enter the description of the route into this field. This field is an
information field only and is not used by the Eclipse System.
SOURCE
The route Source is the label of the calling Panel/Interface.
ACTION
The Action field specifies how the route will behave when it is
activated. When the mouse pointer is placed in the action field an
arrow is displayed. Right click on the arrow to display the drop-down
menu of possible route actions.