Clear-Com Eclipse-Omega - Manual (Page 203)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 9 3
Figure 5-25: Route Action Menu
Talk
When this route action is selected the route will act as a talk only route
from the source to the destination. Signalization will appear on the
destination.
Talk & Reverse Listen
When this route action is set audio will be routed from the source to the
destination and signalization will appear on the destination. Audio will
also be routed from the destination to the source.
Reverse Listen
When this route action is set the route will allow the source to listen to
audio from the destination. No signalization will appear on the source.
Inhibit Talk
When the route is activated all audio from the source to the destination
will be blocked.
DESTINATION
The Route Destination is the label of the Panel Interface receiving the
call.
ACTIVATE WITH TALK
When this box is checked, the route will activate whenever anyone
sets a talk key to the route’s label.
ACTIVATE WITH LISTEN
When this box is checked, the route will activate whenever anyone
sets a listen key to the route’s control label.
Note: Activating the route by a listen has exactly the same effect
as activating it by a talk, unless the Reverse Listen box has
been checked making a bi-directional audio path between
the source and destination.