Clear-Com Eclipse-Omega - Manual (Page 139)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 2 9
Display Dim Timer
Sets the time interval in minutes before the display on an inactive
panel is dimmed to prevent damage to the display. To adjust the time
setting select the timer box to display the adjustment slider and use the
mouse to drag the slider to the required setting. The timer is
adjustable from 0 minutes to 60 minutes. If the timer is set to 0
minutes the display is set to dim permanently.
If the dim timer is set to a value other than “Always Dim” the screen
saver timer will only start after the screen has dimmed. For example if
the dim timer is set to 1 minute and the screen saver timer is set to 1
minute the screen saver will start after 2 minutes. If the dim timer is set
to “Always Dim” the screen saver inactivity timer will start immediately
as the dim timer will effectively be zero.
Note: Only available V-Series panels.
Expansion Panels
Some types of panels can support expansion panels. If this option is
available selecting the expansion panel number attached box will open
a menu showing the type of expansion panels that can be fitted to the
host panel. The types of expansion panels listed will vary according to
the main panel type.
• V12LD - V12LDE may be fitted.
• V24LD - V12LDE may be fitted.
• V12PD - V12PDE may be fitted.
• V24PD - V12PDE may be fitted.
• V12RD - V12RDE may be fitted.
• V24RD - V12RDE may be fitted.
• V12LDD - no expansion panels are supported.
• V12PDD - no expansion panels are supported.
• V12RDD - no expansion panels are supported.
• ICS 2003 - AP22, XPL-12, XPL-22 may be fitted see limitation
below).
• ICS 102 - AP22, XPL-12, XPL-22 may be fitted (see limitation below).
• i-Station - E Station, V Station may be fitted.
• ICS 1008 - EXP1016 may be fitted.
• ICS 1016 - EXP1016 may be fitted.
• ICS 52 - AP22, XPL-12, XPL-22 may be fitted (see limitation below).
• ICS 62 - AP22, XPL-12, XPL-22 may be fitted (see limitation below).
• ICS 92 - AP22, XPL-12, XPL-22 may be fitted (see limitation below).