Clear-Com Eclipse-Omega - Manual (Page 330)

Clear-Com
Eclipse Configuration Software Instruction Manual
8 - 2
Figure 8-1: Audio Mixer Panel
The audio mixer toolbar provides facilities to apply, save or configure
the audio mixer.
SAVE TO ECS CONFIGURATION AND EXIT
Click on this button to save the audio mixer setup to the current ECS
configuration. When in Online mode clicking on this button will also
save the audio mixer settings into the current ECS configuration. After
the setup has been saved the audio mixer will automatically exit back
to panel programming.
ONLINE MODE
Clicking on this button allows audio mixer settings to be sent to the
panel immediately without the need to save to the configuration and
download a new map.
When the Online button is pressed it will flash amber/green and the
mixer pane background will change to amber while ECS contacts the
matrix and uploads the current audio settings for the selected panel. If
the button and audio mixer pane background remain amber (see
Figure 8-2 below) this indicates that ECS was unable to obtain the
current panel audio settings from the matrix (the panel may not be
connected to the matrix).
It may take a few seconds for ECS to obtain the panel details from the
matrix.