Clear-Com Eclipse-Omega - Manual (Page 211)

Clear-Com
Eclipse Configuration Software Instruction Manual 5 - 1 0 1
Figure 5-31: Control Manager Soft Mode Options
AVAILABLE ACTIONS
The Available window provides a complete list of all the available
relays, routes and speed dials (Actions) that can be attached to a
Control.
To attach an Action to a Control, select or create a Control from the
Control Viewer and then either double click the required Action in the
available Actions window or select the Action and click on the ‘>’
symbol between the windows. This transfers the Action into the
Attached Actions window. The Control label can then be placed onto a
panel key or attached as a secondary action to a panel, Interface,
Fixed Group or Party Line depending on user requirements.
ATTACHED ACTIONS
The Attached Actions window provides a list of Actions that have been
attached to a Control. Also within this window Actions can be removed
from Controls.
To remove an attachment of an Action from a control, select the
Control from the Control Viewer window; from the Attached Actions
window double click the Action that is no longer required or select the
Action and click on the ‘<‘ symbol between the Available and Attached
windows. This places the Action back into the Available Actions
window.
Select the ‘Matrix Frame Preferences’ link to display the options for a
number of system wide functions.