Ip cards, Ip cards -9, Figure 6-14 ivc-32 cards list -9 – Clear-Com Eclipse-Omega User Manual
Page 241
Clear-Com
Eclipse Configuration Software Instruction Manual
6 - 9
shown as red. This indicates that care should be taken before
using this panel i.e. check its current usage before assigning it
• If a panel's matrix IP address is not in the current configuration
and a user ID is set the panel is shown as grey to indicate it is
configured for use on another system. In this state only a user
logged in as administrator (in ECS) may assign it to an IVC-32 in
the currently active configuration.
• To un-assign a panel that has been assigned to a port on an
IVC-32 card, simply drag the panel off the port and drop it in the
blank area to the right of the IVC-32 cards.
IP CARDS
The IP Cards pane will display a list of all the IVC-32 cards detected in
the current matrix with the number of the matrix slot the card is in.
Figure 6-14: IVC-32 Cards List
Clicking on the left menu button on any card will display diagnostics
and the current card configuration and allow the card configuration to
be edited.