Hs detect cut ls, Message auto delete, Mute relay on talk key press – Clear-Com Eclipse-Omega User Manual
Page 141: Nearby panel partial, Hs detect cut ls -31, Message auto delete -31, Mute relay on talk key press -31, Nearby panel partial -31
Clear-Com
Eclipse Configuration Software Instruction Manual
5 - 3 1
In the case of V-Series panels this function only relates to XLR-4 and
XLR-5 type headsets that have been modified for PTT. V-Series
XLR-7 headsets and headsets connected to the auxiliary audio
connector use the logic 1 and 2 inputs (see Logic Inputs).
The effect of these functions are:
• No Function - PTT has no effect.
• Activate All Talk Keys - PTT will activate audio paths on all latched
talk keys. Non-latching talk keys will not be activated.
• Activate Two-Way Radio - PTT will activate audio paths on all latched
talk keys connected to two-way radios (normally via a FOR-22 unit).
Note: Not available on Concert panels.
HS Detect Cut LS
When enabled (True) this facility will automatically cut the audio to the
panel loudspeaker if a headset is detected. Highlight the option and
use the drop-down menu to set the option to True or False. The
checkbox will indicate whether the option is enabled.
Note: Only available on V-Series panels.
Message Auto Delete
The message auto delete timeout sets the length of time in minutes
before a message recorded in the listen again buffer is automatically
deleted. If the delay is set to 99 minutes auto delete is disabled. To
set the listen again auto delete timeout highlight the option and click on
the drop-down menu to display the slider. Use the mouse to set the
timeout to a value of 0 to 99 minutes.
Note: Only available on V-Series panels.
Mute Relay On Talk Key Press
If this is set to True the local panel GPO mute relay is fired when a Talk
only key is pressed. The default setting is false.
Note: Not available on PD4212E, PD4215E, PD4222E, PD4224E
and PD4226E panels.
Nearby Panel Partial
This attribute affects the way that Nearby Panels configured in Local
Advanced operate.
The ‘Nearby Panel Partial’ attribute is set to True to enable audio from
nearby panels to be routed to the headset. If it is not set audio from
nearby panels is cut completely to prevent audio feedback.