Clear-Com Eclipse-Omega - Manual (Page 427)

Clear-Com
Eclipse Configuration Software Instruction Manual 1 3 - 3
Click on the checkboxes for the required option or options and then
‘OK’ to continue with the download. A new configuration will be built
and downloaded to the frame.
RED RESET (RESET FRAME AFTER DOWNLOAD)
If the ‘Clear all talk paths and listen levels during reset’ box is not
checked the download will reset the matrix and any crosspoints.
Talk/Listen paths will be remade.
This type of reset is required for:
• Downloading completely new configurations
• Hardware changes (not mandatory)
• Any locally assigned keys will be cleared.
BLACK RESET (CLEAR FRAME MEMORY AFTER
DOWNLOAD)
If the ‘Clear all talk paths and listen levels during reset’ box is checked
the download will clear down any active routes and reset the matrix to
the ECS default map. Any local changes to groups, party lines or IFBs
made via ICS2003 and i-stations are reset to the ECS map default .
This type of reset is used for:
• Correcting erroneous or spurious crosspoints.
• Any locally assigned keys will also be lost.
• Crosspoints - all active keys are reset to off.
• Crosspoint levels - all panel listen levels are rest to normal.
• Locally assigned keys - any locally assigned keys are deleted.
• Local panel microphone settings - all panel microphone settings
are set to the ECS downloaded value.
• Local panel microphone gains- all panel microphone settings are
set to the ECS downloaded value.
• Key status - all keys are unmade.
• Any local changes to groups, party lines and IFBs made via
ICS2003 and i-stations are reset to the ECS map default.
• Locally assigned fixed groups - all groups are reset to the ECS
default.
• Locally assigned party lines -all party lines are reset to the ECS
default.
• Locally assigned IFBs -all IFBs are reset to the ECS default.
• Locally assigned forced listens-all Forced listens are reset to the
ECS default.