Clear-Com Eclipse-Omega - Manual (Page 333)

Clear-Com
Eclipse Configuration Software Instruction Manual 8 - 5
Layout Binaural coax/AES using D25
This configures the audio mixer for use with the AES3 digital option
card and the auxiliary audio connector. The AES3 option card has
both RJ-45 and coax connectors and will auto-detect which is in use.
This option will apply regardless of which connection on the AES3 card
is used.
INPUT AREA
This area contains a list of all the available audio sources and five
columns for processes that can be applied to the audio before it is sent
to the crosspoint audio mixers. Any processing applied at this point
will affect the audio supplied to all the downstream mixing.
AUDIO INPUTS
The first column in the input area lists all the inputs that may be
available in the configuration. All of the possible inputs are listed
below but some inputs may not be available depending on which
input/output interface options have been selected.
HS1 Mic GN
This input takes audio from the headset1 microphone or gooseneck
microphone.
HS2 Mic
This input takes audio from the headset2 microphone.
Matrix1
This input takes mono audio from the analogue matrix connection if the
Basic Layout is being used or one channel of stereo audio from the
AES3 digital option card if this is fitted.
Matrix2
This input takes a second channel of stereo audio from the AES3
digital option card. This input is only available if the AES3 digital
option is fitted.
Ext1
This input uses the External Input 1 on the auxiliary audio connector.
Ext2
This input uses the External Input 2 on the auxiliary audio connector.